VooPoo presents the VooPoo DRAG Mini Refresh Edition Starter Kit, a match made in heaven with the DRAG Mini 117W Gene.FIT Chip Box Mod and the PnP Pod Tank. The upgraded Gene.FIT chip is secured by a V0 class fireproofing bridge to block liquid, dust, or burnout. The new chip has an increased 5 to 117W power output, 0.05 to 5.0 ohm resistance, 0 to 7.5V output, and 40A max current output. The Drag Mini 117W now features FIT Mode, allowing the device to auto detect optimal power output for the installed sub-ohm tank and allows the user to select from three preset levels. Fit 1 is Battery Setting, allowing the user to conserve battery at the lowest recommended output for the installed coil head. Fit 2 is Flavor Setting, which gives medium output with an emphasis on flavor production. Fit 3 is Cloud Setting which provides maximum power for maximum cloud production. The VooPoo Drag Mini 117W has a 5 bank memory for user defined settings. The new Gene.FIT chip also comes with a temperature control suite that has an atomizer resistance of 0.05 to 1.5 ohm, temperature range of 200 to 600 Degrees Fahrenheit and is compatible with nickel, titanium, and stainless steel. VooPoo has retained the three button control scheme with an enlarged firing button and two adjustment buttons. VooPoo has changed the Mini to have a built-in 4400 mAh battery that can be charged through the micro-USB port. The Drag Mini 117W box mod has a 0.91 Inch OLED display that shows temperature mode and output, output power, atomizer resistance, and battery life indicator. The body of the Drag Mini 117W is considerably smaller than the previous design but retains the beautiful zinc alloy frame, DRAG lettering on on panel, and gorgeous resin plate on the other. On top of the device is a spring loaded gold plated 510 connection with a stainless steel thread point. This box mod also comes with a host of protections such as battery reverse protection, over charge protection, and balanced battery charging.
The VooPoo Drag 2 has been paired with the PnP Pod Tank which has a 4.5ml PCTG e-liquid capacity and a stainless steel 510 base. This tank's bottom fill port can be accessed through a magnetic connection. This allows the user to remove the PCTG tank section to fill or change out coils. The PnP Tank is compatible with the entire PnP replacement coil family and comes with the PnP VM-5 and PnP VM-6 replacement coils. The PnP VM-5 is a single coil with an atomizer resistance of 0.2 ohm, recommended range of 40 to 60W, and is best for loose MTL applications. The PnP VM-6 coils are better for true direct lung applications, and have a resistance of 0.15 ohm, a recommended range of 60 to 80W. The PnP Tank has dual fully adjustable air slots which can be closed off durning storage. The PnP has a stainless steel 510 threading, 24K gold plated contact and a tapered bore drip tip. The VooPoo DRAG 2 Refresh Edition Starter Kit is a fresh take of an already dependable product.